UnlimitedPocket

Rebar Calculator

Estimate rebar quantity and length for a concrete slab grid.

–Bars along length
–Bars along width
–Total length of rebar (ft)
–Stock bars needed (+10%)

What is the Rebar Calculator used for?

Use it to estimate rebar for slabs and footings.

When to use it

  • Concrete slabs
  • Foundations
  • Material ordering

How to use the Rebar Calculator

  1. Enter your numbers in the fields above – the rebar calculator starts with example values so you can see how it works.
  2. Pick the right units or options from the drop-down menus where they appear.
  3. Read the results instantly; they update every time you change a value.
  4. Change one input at a time to compare different scenarios, then note or copy the figures you need.

Worked example

For example, if you enter:

  • Slab length: 20
  • Slab width: 12
  • Bar spacing: 12
  • Edge cover: 3
  • Stock bar length: 20

the rebar calculator gives:

  • Bars along length: 12
  • Bars along width: 20
  • Total length of rebar: 464
  • Stock bars needed: 26

Replace the example values with your own numbers to get your personal result.

Learn how to use & master this

Free guide · 8 min readHow to Calculate Concrete Volume for Slabs, Footings, and Patios (Step-by-Step)Read →Free guide · 9 min readThe Complete Guide to Rebar Spacing, Foundations, and Construction EstimatesRead →

About this tool

The Rebar Calculator works out bars along length, bars along width, total length of rebar and stock bars needed from a few simple inputs. Type slab length, slab width, bar spacing, edge cover and stock bar length and the results update instantly as you change any number – there is no button to press and nothing to install.

How to use it: start with the example values already filled in to see how the rebar calculator behaves, then replace them with your own figures. Every field accepts decimals, and you can change one value at a time to compare scenarios side by side.

Results are rounded for readability, so treat them as a reliable estimate rather than an official figure. Always confirm quantities with your supplier and check local building codes before you buy materials or build.

Frequently asked questions

How does the rebar calculator work?

It uses standard formulas to turn slab length, slab width and bar spacing into bars along length, bars along width and total length of rebar. The calculation reruns every time you change an input.

Is the rebar calculator free?

Yes. The rebar calculator on UnlimitedPocket is completely free, with no sign-up, no usage limits and no watermarks.

Is my data uploaded anywhere?

No. Everything is calculated in your browser on your own device. Nothing you type or open is sent to our servers.

Report an issue

Something wrong with the Rebar Calculator? Tell us and we’ll fix it.